1:16 BREAKER Drift 4WD Racing
Speed & Drift Racing car
1
km/h
Electronic Stability Program
When the trucks driving occurs side slip or out of control,it can timely and effectively correct the car attitude and direction. The function and sensitivity of gyroscope sensor can be adjusted and turn off by the ESP knob of the transmitter.
High Speed Bearings (The Whole Car)
The whole vehicle uses ball bearings to improve the mechanical transmission efficiency. With ball bearings, the friction during power transmission is reduced, the transmission efficiency of mechanical power is improved, and mechanical damage is reduced at the same time.
Planetary differential
High-strength nylon planetary differential (can be upgraded to metal differential), strong and wear-resistant, more stable in curve driving.
Integrated gyroscope waterproof ESC
4CH 2.4G waterproof,Dust-proof design
Electronic Stability Program
Low Voltage Cutoff and Thermal Overload Protection
Brake, BEC, LVC sensitivity, reverse speed settings
Brushed Motor
High performance power system
Integrated gyroscope waterproof ESC
4CH 2.4G waterproof,Dust-proof design
Electronic Stability Program
Low Voltage Cutoff and Thermal Overload Protection
Brake, BEC, LVC sensitivity, reverse speed settings
Brushless Motor
3900KV brushless motor power system with finned can for better heat dissipation.
INNOVATION
Explore these key features to see how every design element on the UDIPOWER combines to creat an authentic and thrilling driving experience.
Cooling modeling
Controller Headlight with 3 Lights modes.
Two set of tires
RC High Speed/Drift Car. Equipped with two sets of different tires to suit different reasons and can be replaced freely.
Power Supply
7.4V 1200mAh (8.88Wh) rechargeable Li-Po battery
Model level remote control handle
- 2.4GHz full proportion radio remote control system
- Steering range percentage adjustment
- Electronic stability system (ESP)
- Steering trim
- 4 channels transmitter
- With out of control protection function
- Speed switch
- Controller Headlight
4WD RACING DATA
Model No.: UD1601/UD1601PRO
Assembly time: Less than half an hour
High Speed Bearings: The whole car
Battery: Include
Remote Control Distance: about 50m
Playing Time: about 15 minutes
Battery capacity: 7.4V, 1200mAh
Charger: Include
Completion Level: Ready-to-run
Differential: Two oil-filled gears
Drivetrain: Four Wheel Drive
Drive Type: Forward/Brake/Reverse
Final drive ratio: 6.05:1
Front wheel track: 3.98 inch(101mm)
Power Type: Electric
Tooth pitch: 0.5 / 0.7 / 1.0MOD
Bauchfreiheit: 0.39 inch(10mm)
Internal gear ratio: 2.8:1.1
Motor type: brushed motor/brushless motor
Gear: 16T
Product Length: 11.81″(300mm)
Product Width: 5.91″(150mm)
Product Height: 3.93″(100mm)
Product Weight: 635.5g
Transmitter: Include
Rear wheel track: 3.98″(101mm)
Receiver: Include
Scale: 1/16
Servo: Include
Speed controller: Include
Spur gear: 38T
Suspension: Independent
Truck type: Road Racing
Wheel base: 6.69″(170mm)
Type：brushed motor(UD1601)
Weight: 90.8g
Length: 53.5mm
Diameter: 27.5mm
Connector Type: Dual Wire
Type: Brushless Motor(UD1601PRO)
Weight: 58g
Length: 46.5mm
Diameter: 24mm
Connector Type: 3.5mm bullet connectors
High Bright LED Lights
·Controller Headlights
·TailLights
Waterproof Electronic Speed Control
·Integrated ESC
·Real-time telemetry
·Electronic Stability Program(gyroscope)
·Powered accessory ports
Decoration
·PC material bodyshell,high toughness and not easy to deform
·Front Bumper
·The wheels are also equipped with dummy brake discs integrated hex adapters
·4 pcs drift tires
·Rear view mirror, Rear wing
Wheels and Tires
·Road Racing tires
·48mm tires
Suspension
·Provides scale looks and authentic off-road dynamics
·Front and rear independent suspension damping
·High-efficiency metal drive shaft
Steering
·17G steering servo
·Dual bellcrank design with bearings and integrated servo saver
·Solid non-adjustable steering links for rugged durability
Drivetrain
·Steel driveshafts
·Oil-filled limited slip front differential
·Heavy-duty splined front driveshaft
·Fixed-length steel rear driveshaft
Sealed Ball Bearing
Hardware with rust-resistant native oxid coating.
Model No. UD1601: UDIRC UDIPOWER 4WD Racing Trcuk
What’s In The Box:
Racing Truck with ESC and Motor
User Manual
2.4GHz Transmitter
Maintenance tools
Rechargeable battery
USB Charger
What You’ll Need
Transmitter’s batteries
4×1.5V, AA battery
Four AA alkaline batteries for the transmitter
Model No. UD1601PRO: UDIRC UDIPOWER 4WD Racing Trcuk
What’s In The Box:
Racing Truck with ESC and Motor
User Manual
2.4GHz Transmitter
Maintenance tools
Rechargeable battery
USB Charger
What You’ll Need
Transmitter’s batteries
4×1.5V, AA battery
Four AA alkaline batteries for the transmitter
* Note: the data on the page are obtained from laboratory tests and are for reference only. If there is any error, the products obtained from sales shall prevail.
