+86 754 8581 6283
search

1:10 BANG Short Course Truck

1

mph

Brushless Motor

Equipped with SURPASS HOBBY 3660-2600KV Sensorless brushless waterproof motor,0.8M-15T POWED metallurgy motor gear.

Integrated three-speed central gearbox

UDIPOWER innovative technology,the whole car with metal gear.Longtudinal central integrated three-speed central transmission with high-torque clutch. Part-time four-wheel drive mode(High speed rear wheel drive H2WD/High Speed four wheel drive H4WD/Low speed four wheel drive L4WD can be controlled by the transmitter)When in Low speed four wheel(L4WD)/High speed rear wheel drive(H2WD),the center differential is locked;When in High speed four wheel drive (H4WD),the center differential is running,which comprehensively improves the walking performance of the trucks and greatly improves the adaptability to various venues and gameplay.

120A ESC

The original 120A splash-proof brushless electric regulator, aluminum alloy housing, built-in 2 cooling fans, has higher cooling efficiency, is compatible with 2S-3S lithium battery (automatic identification), uses 2 XT60 power plugs (male), and supports parallel use of dual batteries.

INNOVATION

Explore these key features to see how every design element on the UDIPOWER BANG combines to creat an authentic and thrilling driving experience.

Solid Rear Axle BLASTER's unique solid rear axle design is combined with a 4-link
geometry to eliminate twist. It applies power to the ground like
anything else. Go straight on under acceleration, then easily rotate the
throttle to power slide as needed. Real driving dynamics challenge
your driving skills in fun and exciting new ways. Dual battery compartment Colsed dual battery compartment design and it can accommodates
double 2S Lipo or 3S Lipo batteries. The battery cover adopts a
flexible elastic buckle structure, which is convenient for disassembly
and installation. Support dual battery parallel use. Cage Tough Roll Cage A beautifully formed one-piece cage frame is fully integrated with the
chassis and suspension to create a very strong, lightweight structure
for mounting components such as shock absorbers and suspension. Dual GTR Shocks Simulated dual-type shock absorption system, a total of eight shock
absorbers at the front and rear. 4pcs Metal hydraulic spring shock
absorbers and 4pcs two-speed reverse metal nitrogen gas dampers. 4-link rear suspension Huge trailing arms and heavy-duty linkages, along with functional limit
straps, keep the solid axle firmly in check. Precisely engineered 4-link
geometry tests driver skills with responsive and predictable handling
as you spin the truck and steer through tight sections of the track. Inverted three-dimensional chassis Inverted three-dimensional chassis structure, using 2.5mm thick aluminum alloy
bottom plate to enhance the rigidity of the frame, closed dual battery compartment
design, the battery cover adopts a flexible elastic buckle structure, which is
convenient for disassembly and installation. The battery compartment
max supports to 140×45×30mm size batteries, compatible with
LiPo batteries(TX60 plug) and supports parallel use of dual batteries.
Steering servo using 15kg metal gear waterproof servo. Steel drivetrain The front, middle and rear powder metallurgy metal gear-sealed
planetary differentials are equipped as standard; powder metallurgy
metal transmission gears, synchronizers and forks are equipped as
standard, and the wheels are also equipped with simulated "brake
calipers" and 14mm metal brake discs with integral hexagon adapter. Steel drivetrain The front, middle and rear powder metallurgy metal gear-sealed
planetary differentials are equipped as standard; powder metallurgy
metal transmission gears, synchronizers and forks are equipped as
standard, and the wheels are also equipped with simulated "brake
calipers" and 14mm metal brake discs with integral hexagon adapter.

Electronic Stability Program（gyroscope）

This product has the function of ESP car stability system, which can effectively correct the car attitude and direction when the car skids or loses control. The function and sensitivity of the car gyroscope sensor can be adjusted through the ESP knob of the transmitter.

High-brightness LED taillights (Red outside and yellow inside)

Model level remote control handle

  • 2.4GHz full proportion radio remote control system
  • Steering range percentage adjustment
  • Electronic stability system(ESP)
  • Steering trim
  • Switch the driving modes
  • Mode switch (M1-M4)
  • Upgrade channel
  • 7-channel miniature receiver with built-in gyroscope (Sensitivity adjustable)
  • 7 channels transmitter
  • With out of control protection function
  • Supporting 1,7 channels four mode,Front and rear turn way
  • Suitables for RC cars,RC boats and RC tanks

BANG DESERT TRUCK DATA

Model No: UD1002

Length: 600mm

Width: 300mm

Height: 250mm

Rear wheel track: 249mm

Front wheel track: 240mm

Wheel base:345mm

Bauchfreiheit: 56mm

Weight: 3.9KG

Front Shock Length: 115mm

Front Threaded Shock Length: 112mm

Rear Shock Length: 115mm

Rear Threaded Shock Length: 112mm

Tires(pre-glued): 115mm × 45mm

Speed Control: Default

Motor(electronic): 3660-2600kV

Drive Type: Forward/Brake/Reverse

Overall Drive Ratio: 17.89:1

Front Differential Type: Sealed

Rear Differential Type: Sealed

Center Differential Type: Sealed

Chassis Structure/Material: Inverted composite tub

Brake Type: Electronic

Drive System: 4WD

Steering: Dual bellcranks with ball bearings

Radio System: 7-channel transmitter with receiver

Servos: 15kg Steel gear digital Steering Servo

Top Speed(stock gearing): 3s LiPo – 45+ mph

Skill Level: 5

Battery Compartment: 140×45×30mm

Type: Sensorless brushless

Weight: 217 克

Length: 60mm

Diameter: 36mm

Output shaft: 3.17mm

Connector Type: 4.5mm bullet connectors

Input Voltage(cells): 3s Lipo(max：11.1volts)

Case Size: 129mm x 44mm x 40mm

BEC Voltage: 6.0 V

Continuous current: 120 A

Low Voltage Detection(LVD): Slowdown/stop

Ports: TX Input, Auxiliary Fan

Type: Adjustable

High Bright LED Lights
·Anti-collision bar double light bar
·All white Lights in the whole car
·Tail light(Red outside and Yellow inside)
·High-valtage 8 channel power amplifier for intense, brilliant LED lighting
·Regulated output for stable lighting performance (no flickering or dimming as the battery
voltage changes)

Waterproof Electronic Speed Control
·3s Lipo compatible
·Integrated cooling fan
·Real-time telemetry
·Aluminum alloy shell heat sink
·Powered accessory ports

Up to 45+mph with 3s Lipo Batteries

Innovative Battery Compartment
·Closed dual battery compartment design
·Accommodates dual 2S Lipo or 3S Lipo batteries
·The battery cover adopts a flexible elastic buckle structure, which is convenient for disassembly and installation
·Support dual battery parallel use

Decoration
·PC material bodyshell
·Strong and functional tube frame mimics full-size off-road racers
·The wheels are also equipped with dummy “brake calipers”, 14mm metal brake discs with one-piece hex adapters
·Two fully-functional spare tires
·Dummy parts: fire extinguisher, shock reservoir, battery, oil bottle and metal drive shaft
·The interior is equipped with a simulated driver, driver’s seat

Chassis
·Composite inverted tub design
·Makes maintenance easier
·Allows easy access to components
·Tough skid plates protect critical components
·Fully integrated tube frame, added rigidity for the whole car
·Reinforced bumpers to absorb impacts

Suspension
·Independent suspension, excellent handling.
·Heavy front independent suspension swing arm.
·V-type four-link rear suspension with solid rear axle.
·Independent front and rear anti-roll bars enhance off-road driving attitude.
·Rear axle upper limit wire rope.
·Four metal hydraulic spring twist adjustable shock absorbers.
·4 two-speed reverse metal nitrogen dampers

Steering
·15kg Steel gear digital Steering Servo
·Dual bellcrank design with bearings and integrated servo saver
·Solid non-adjustable steering links for rugged durability

Drivetrain
·Steel CVD driveshafts(front)with 6mm stub axles
·Metal straight shaft (rear)
·Oil-immersed front/rear differential
·With steel wire limit rope (rear)
·Heavy splined front drive shaft
·Fixed length metal rear drive shaft

Transmission
·All-metal gear direct drive transmission
·With central differential lock
·Removes as a single piece for easy maintenance

Wheels and Tires
·Off-road tires
·115mm tires

Sealed Ball Bearing

Hardware with rust-resistant native oxid coating

Model UD1002: UDIRC UDIPOWER BANG 4WD Short Course Truck

What’s In The Box:
BANG Short Course Truck with ESC and 2600KV motor
User Manual
2.4GHz 7 channels radio system
Maintenance tools

What You’ll Need:
Batteries
Blaster Desert Truck accepts a single 2s Lipo battery or dual 2s Lipo batteries or dual 3s Lipo batteries

Charger
Recommend to use a charger for Easy and fast charging performance

AA Alkaline Batteries
Four AA alkaline batteries for the transmitter

* Note: the data on the page are obtained from laboratory tests and are for reference only. If there is any error, the products obtained from sales shall prevail.

UD1001 Operation Guide Download
Download