1:10 SCALE HIGH-PERFORMANCE DESERT TRUCK

1

mph

Brushless Motor

Equipped with SURPASS HOBBY 3660-2600KV Sensorless brushless waterproof motor,0.8M-15T POWED metallurgy motor gear.

Integrated three-speed central gearbox

UDIPOWER innovative technology,the whole car with metal gear.Longtudinal central integrated three-speed central transmission with high-torque clutch. Part-time four-wheel drive mode(High speed rear wheel drive H2WD/High Speed four wheel drive H4WD/Low speed four wheel drive L4WD can be controlled by the transmitter)When in Low speed four wheel(L4WD)/High speed rear wheel drive(H2WD),the center differential is locked;When in High speed four wheel drive (H4WD),the center differential is running,which comprehensively improves the walking performance of the trucks and greatly improves the adaptability to various venues and gameplay.

120A ESC

The original 120A splash-proof brushless electric regulator, aluminum alloy housing, built-in 2 cooling fans, has higher cooling efficiency, is compatible with 2S-3S lithium battery (automatic identification), uses 2 XT60 power plugs (male), and supports parallel use of dual batteries.

INNOVATION

Explore these key features to see how every design element on the UDIPOWER BLASTER combines to creat an authentic and thrilling driving experience.

Electronic Stability Program(gyroscope)

This product has the function of ESP car stability system, which can effectively correct the car attitude and direction when the car skids or loses control. The function and sensitivity of the car gyroscope sensor can be adjusted through the ESP knob of the transmitter.

High-brightness LED taillights (Red outside and yellow inside)

Model level remote control handle

  • 2.4GHz full proportion radio remote control system
  • Steering range percentage adjustment
  • Electronic stability system(ESP)
  • Steering trim
  • Switch the driving modes
  • Mode switch (M1-M4)
  • Upgrade channel
  • 7-channel miniature receiver with built-in gyroscope (Sensitivity adjustable)
  • 7 channels transmitter
  • With out of control protection function
  • Supporting 1,7 channels four mode,Front and rear turn way
  • Suitables for RC cars,RC boats and RC tanks

BLASTER DESERT TRUCK DATA


Model No: UD1001


Length: 550mm


Width: 295mm


Height: 250mm


Rear wheel track: 249mm


Front wheel track: 240mm


Wheel base:345mm


Bauchfreiheit: 56mm


Weight: 3.8KG


Front Shock Length: 115mm


Front Threaded Shock Length: 112mm


Rear Shock Length: 115mm


Rear Threaded Shock Length: 112mm


Tires(pre-glued): 120mm × 48mm


Speed Control: Default


Motor(electronic): 3660-2600kV


Drive Type: Forward/Brake/Reverse


Overall Drive Ratio: 17.89:1


Front Differential Type: Sealed


Rear Differential Type: Sealed


Center Differential Type: Sealed


Chassis Structure/Material: Inverted composite tub


Brake Type: Electronic


Drive System: 4WD


Steering: Dual bellcranks with ball bearings


Radio System: 7-channel transmitter with receiver


Servos: 15kg Steel gear digital Steering Servo


Top Speed(stock gearing): 3s LiPo – 45+ mph


Skill Level: 5


Battery Compartment: 140×45×30mm


Type: Sensorless brushless


Weight: 217 克


Length: 60mm


Diameter: 36mm


Output shaft: 3.17mm


Connector Type: 4.5mm bullet connectors


Input Voltage(cells): 3s Lipo(max:11.1volts)


Case Size: 129mm x 44mm x 40mm


BEC Voltage: 6.0 V


Continuous current: 120 A


Low Voltage Detection(LVD): Slowdown/stop


Ports: TX Input, Auxiliary Fan


Type: Adjustable


High Bright LED Lights
·Angle lights
·All white Lights in the whole car
·Tail light(Red outside and Yellow inside)
·High-valtage 8 channel power amplifier for intense, brilliant LED lighting
·Regulated output for stable lighting performance (no flickering or dimming as the battery
voltage changes)


Waterproof Electronic Speed Control
·3s Lipo compatible
·Integrated cooling fan
·Real-time telemetry
·Aluminum alloy shell heat sink
·Powered accessory ports


Up to 45+mph with 3s Lipo Batteries


Innovative Battery Compartment
·Closed dual battery compartment design
·Accommodates dual 2S Lipo or 3S Lipo batteries
·The battery cover adopts a flexible elastic buckle structure, which is convenient for disassembly and installation
·Support dual battery parallel use


Decoration
·PC material bodyshell
·Strong and functional tube frame mimics full-size off-road racers
·The wheels are also equipped with dummy “brake calipers”, 14mm metal brake discs with one-piece hex adapters
·Two fully-functional spare tires
·Dummy parts: fire extinguisher, shock reservoir, battery, oil bottle and metal drive shaft
·The interior is equipped with a simulated driver, driver’s seat


Chassis
·Composite inverted tub design
·Makes maintenance easier
·Allows easy access to components
·Tough skid plates protect critical components
·Fully integrated tube frame, added rigidity for the whole car
·Reinforced bumpers to absorb impacts


Suspension
·Independent suspension, excellent handling.
·Heavy front independent suspension swing arm.
·V-type four-link rear suspension with solid rear axle.
·Independent front and rear anti-roll bars enhance off-road driving attitude.
·Rear axle upper limit wire rope.
·Four metal hydraulic spring twist adjustable shock absorbers.
·4 two-speed reverse metal nitrogen dampers


Steering
·15kg Steel gear digital Steering Servo
·Dual bellcrank design with bearings and integrated servo saver
·Solid non-adjustable steering links for rugged durability


Drivetrain
·Steel CVD driveshafts(front)with 6mm stub axles
·Metal straight shaft (rear)
·Oil-immersed front/rear differential
·With steel wire limit rope (rear)
·Heavy splined front drive shaft
·Fixed length metal rear drive shaft


Transmission
·All-metal gear direct drive transmission
·With central differential lock
·Removes as a single piece for easy maintenance


Wheels and Tires
·Off-road tires
·120mm tires


Sealed Ball Bearing


Hardware with rust-resistant native oxid coating


Model UD1001: UDIRC UDIPOWER BLASTER 4WD DESERT TRUCK


What’s In The Box:
Blaster Desert Truck with ESC and 2600KV motor
User Manual
2.4GHz 7 channels radio system
Maintenance tools


What You’ll Need:
Batteries
Blaster Desert Truck accepts a single 2s Lipo battery or dual 2s Lipo batteries or dual 3s Lipo batteries

Charger
Recommend to use a charger for Easy and fast charging performance

AA Alkaline Batteries
Four AA alkaline batteries for the transmitter


* Note: the data on the page are obtained from laboratory tests and are for reference only. If there is any error, the products obtained from sales shall prevail.

UD1001 Operation Guide Download