1:16 Full Scale High Performance 4WD Racing Car

Speed & Drift Racing car

1

km/h

Electronic Stability Program

When the trucks driving occurs side slip or out of control,it can timely and effectively correct the car attitude and direction. The function and sensitivity of gyroscope sensor can be adjusted and turn off by the ESP knob of the transmitter.

High Speed Bearings (The Whole Car)

The whole vehicle uses ball bearings to improve the mechanical transmission efficiency. With ball bearings, the friction during power transmission is reduced, the transmission efficiency of mechanical power is improved, and mechanical damage is reduced at the same time.

Planetary differential

High-strength nylon planetary differential (can be upgraded to metal differential), strong and wear-resistant, more stable in curve driving.

Integrated gyroscope waterproof ESC

4CH 2.4G waterproof,Dust-proof design
Electronic Stability Program
Low Voltage Cutoff and Thermal Overload Protection
Brake, BEC, LVC sensitivity, reverse speed settings

Brushed Motor

High performance power system

Integrated gyroscope waterproof ESC

4CH 2.4G waterproof,Dust-proof design
Electronic Stability Program
Low Voltage Cutoff and Thermal Overload Protection
Brake, BEC, LVC sensitivity, reverse speed settings

Brushless Motor

3900KV brushless motor power system with finned can for better heat dissipation.

INNOVATION

Explore these key features to see how every design element on the UDIPOWER combines to creat an authentic and thrilling driving experience.


Cooling modeling

Controller Headlight with 3 Lights modes.

Two set of tires

RC High Speed/Drift Car. Equipped with two sets of different tires to suit different reasons and can be replaced freely.

Power Supply

7.4V 1200mAh (8.88Wh) rechargeable Li-Po battery

Model level remote control handle

  • 2.4GHz full proportion radio remote control system
  • Steering range percentage adjustment
  • Electronic stability system (ESP)
  • Steering trim
  • 4 channels transmitter
  • With out of control protection function
  • Speed switch
  • Controller Headlight

4WD RACING DATA


Model No.: UD1602/UD1602PRO


Assembly time: Less than half an hour


High Speed Bearings: The whole car


Battery: Include


Remote Control Distance: About 50m


Playing Time: About 15 minutes


Battery capacity: 7.4V, 1200mAh


Charger: Include


Completion Level: Ready-to-run


Differential: Two oil-filled gears


Drivetrain: Four Wheel Drive


Drive Type: Forward/Brake/Reverse


Final drive ratio: 6.05:1


Front wheel track: 3.98 inch(101mm)


Power Type: Electric


Tooth pitch: 0.5 / 0.7 / 1.0MOD


Bauchfreiheit: 0.39 inch(10mm)


Internal gear ratio: 2.8:1.1


Motor type: brushed motor/brushless motor


Gear: 16T


Product Length: 11.81″(300mm)


Product Width: 5.91″(150mm)


Product Height: 3.93″(100mm)


Product Weight: 635.5g


Transmitter: Include


Rear wheel track: 3.98″(101mm)


Receiver: Include


Scale: 1/16


Servo: Include


Speed controller: Include


Spur gear: 38T


Suspension: Independent


Truck type: Road Racing


Wheel base: 6.69″(170mm)


Type:brushed motor(UD1602)


Weight: 90.8g


Length: 53.5mm


Diameter: 27.5mm


Connector Type: Dual Wire


Type: Brushless Motor(UD1602PRO)


Weight: 58g


Length: 46.5mm


Diameter: 24mm


Connector Type: 3.5mm bullet connectors


High Bright LED Lights
·Controller Headlights
·TailLights


Waterproof Electronic Speed Control
·Integrated ESC
·Real-time telemetry
·Electronic Stability Program(gyroscope)
·Powered accessory ports


Decoration
·PC material bodyshell,high toughness and not easy to deform
·Front Bumper
·The wheels are also equipped with dummy brake discs integrated hex adapters
·4 pcs drift tires
·Rear view mirror, Rear wing


Wheels and Tires
·Road Racing tires
·48mm tires


Suspension
·Provides scale looks and authentic off-road dynamics
·Front and rear independent suspension damping
·High-efficiency metal drive shaft


Steering
·17G steering servo
·Dual bellcrank design with bearings and integrated servo saver
·Solid non-adjustable steering links for rugged durability


Drivetrain
·Steel driveshafts
·Oil-filled limited slip front differential
·Heavy-duty splined front driveshaft
·Fixed-length steel rear driveshaft


Sealed Ball Bearing


Hardware with rust-resistant native oxid coating.


Model No. UD1602: UDIRC UDIPOWER 4WD Racing Trcuk


What’s In The Box:
Racing Truck with ESC and Motor
User Manual
2.4GHz Transmitter
Maintenance tools
Rechargeable battery
USB Charger


What You’ll Need
Transmitter’s batteries
4×1.5V, AA battery
Four AA alkaline batteries for the transmitter


Model No. UD1602PRO: UDIRC UDIPOWER 4WD Racing Trcuk


What’s In The Box:
Racing Truck with ESC and Motor
User Manual
2.4GHz Transmitter
Maintenance tools
Rechargeable battery
USB Charger


What You’ll Need
Transmitter’s batteries
4×1.5V, AA battery
Four AA alkaline batteries for the transmitter


* Note: the data on the page are obtained from laboratory tests and are for reference only. If there is any error, the products obtained from sales shall prevail.

Operation Guide Download